Hermes2020
Well-known member
- Messages
 - 1,861
 
This is the painting I was referring to in my response to Donna T's post Scribble, Spray, Scratch and repeat:
	
	
		
			
			
				
					
						
							
						
					
					creativespark.art
				
			
		
	
This is painted on reinforced primed hardboard in Winsor & Newton Griffin alkyd paints. Size: 1220 x 800 mm. There is some 3mm copper tubing used as stitching to link certain elements. The shapes are profiles I borrowed from my Reclining Nude Concrete Sculpture.
	
	
		
			
			
				
					
						
							
						
					
					creativespark.art
				
			
		
	
This painting will hang in the living room that overlooks the pool and concrete sculpture, so there will be some resonance between the sculpture and this painting.
		
		
	
	
		
	
It is quite a big painting, so here are some details to show the textures.
		
	
		
	
		
	
		
	
		
	
		
	
				
			Scribble, Spray, Scratch and repeat
I found a blog post by abstract artist Jane Davies where she talks about scribbling and making marks when she's frustrated with her work. I'm able to scribble so I gave it a shot. Spraying water on the scribbles made with NeoColor II crayons created watercolor effects and covering passages with...
				This is painted on reinforced primed hardboard in Winsor & Newton Griffin alkyd paints. Size: 1220 x 800 mm. There is some 3mm copper tubing used as stitching to link certain elements. The shapes are profiles I borrowed from my Reclining Nude Concrete Sculpture.
Reclining Nude Concrete Sculpture
Approximately life size (length 2 m) poolside sculpture. The sculpture consists of fast set concrete slices joined with 10 mm stainless steel threaded rod and stainless steel nuts. The patination forms naturally and varies from batch to batch when the concrete is mixed. I liked the colours that...
				This painting will hang in the living room that overlooks the pool and concrete sculpture, so there will be some resonance between the sculpture and this painting.
It is quite a big painting, so here are some details to show the textures.
	
			


) : are the copper pieces coated with something, or will they oxidize naturally? 
.  I haven't quite decided what to do yet. At the moment they are uncoated and I didn't polish them before adding them to the painting. That was their state of shininess on the roll I cut the lengths from, so the copper will darken naturally over time. I think I will wait and see how they look after a few months on site. Since I will always have access to the painting, I could polish and varnish them any time later. I'm guessing I will not do that and will end up just leaving them to do what they want to do. A dynamic situation will be an added dimension.